今天我生日！！

好久没上了，生日突然想起，来发个帖！
另外问下大家，重装了下显卡驱动，发现NVIDIA调整视频图像设置里有个反交错，使用反胶卷过带，你们都开着么，不知道要不要关掉

生日快乐

生日快乐！
我的电脑的英伟达驱动设置里没有这个项目欸，名字看着好高级

生日快乐。

这个设置吧，我是开着的，开着就行，不会影响什么。


我不是特别了解这个东西，只知道极大多数情况下都用不上，开着也无所谓。具体情况还是让其它大佬解释吧。

关于反交错的一些信息：
Deinterlacing - Wikipedia

From Reddit:
You would only use de-interlacing to correct interlace artifacts on sources like DVD, 720i or 1080i. Interlacing is where half the screen is drawn on the first frame, and the second half is drawn on the next frame (every second line). That leads to a strange effect on areas of high motion.

Inverse Telecine is frame rate conversion from 24 fps to more typical frame rates used on a computer (30, 60, 120 for example). It works to eliminate stuttering during the conversion. You'd only need to use this if you're converting to or from 24 fps (film), i.e., if your source frame rate differs from the frame rate you're rendering to.

And about this question:
so for gaming and watching streams/videos, it doesn't matter what option i choose? The performance/quality is unaffected?

The reply was:
For those use cases, these settings won't do anything. interlaced video is getting increasingly rare. Interlacing was used when video needed to have very low bandwidth for standard-definition and very early high-def televisions (through 2007 or so). The only real recent way to see interlaced is some broadcast TV stations are interlaced 1080i if you view TV via over the air antenna.

原帖链接：What is "deinterlacing" and should i use "inverse telecine"? - Reddit

生日快乐

生日快乐雅~这位也是永远的17岁吗

生日快乐呀~

Michelangeli 发表于 2026-1-24 19:37
生日快乐！
我的电脑的英伟达驱动设置里没有这个项目欸，名字看着好高级 ...

这个应该都有~但关注的人应该几乎没有


o0痕痕0o于2026-1-24 21:47补充以下内容：

Suzuma 发表于 2026-1-24 20:21
生日快乐。

这个设置吧，我是开着的，开着就行，不会影响什么。

要长脑子了，查了大量资料，就是不知道这个到底是硬件反交错开关，播放器以前设置过，解码器lav负责自动判断是否需要反交错处理后发给MadVR处理后期画面，不知道这个按钮开启后是会每个视频都先处理一遍反交错还是和lav一样只给需要的视频反交错，需要反交错时会不会和lav重复处理，lav调用的反交错会不会是同一个，我自己也晕了，貌似网上类似问题有，但都没说出个结果

生日快乐~

生日快樂